道路运输车辆达标车型整车主动安全项目测试简析

道路运输车辆达标车型的实施,有效提升了道路运输车辆的安全性能。文章主要从电子稳定性控制系统、车道偏离预警系统、前向碰撞预警系统、自动紧急制动系统四个整车主动安全测试项目对道路运输车辆达标车型相应标准进行介绍,为道路运输车辆达标车型相关从业人员提供了主动安全整车项目试验参考。     

云南省民航客运发展预测

民航运输是云南省在进行综合交通运输建设的重点之一,也是该省在未来"十四五"(2021-2025年)和"十五五"(2026-2030年)规划期间的研究热点。本文以云南省为研究范围,以省内民航客运为研究对象,选取省内主要的社会经济因素为影响因子,运用主成分分析法(PCA)、反向传播神经网络算法(BP神经网络算法)和回归分析法,构建了省内民航客运的预测模型,得出省内各主要机场在"十四五"末和"十五五"末的预计旅客吞吐量,对省政府在进行机场改扩建上有一定的指导意义。     

Instantaneous communication throughputs of vehicular ad hoc networks

Vehicular ad hoc networks (VANETs) formed by connected vehicles in a traffic stream could be applied to improve safety, mobility, and environmental impacts of a transportation system. In this paper, we present analytical models for the instantaneous communication throughputs of VANETs to measure the efficiency of information propagation under various traffic conditions at a time instant. In particular, we define broadcast and unicast communication throughputs by the wireless channel bandwith multiplied by the average probabilities that one vehicle is a successful receiver and sender in a VAENT, respectively. With a protocol communication model, we derive formulas to determine the probabilities for an equipped vehicle to be a successful broadcast receiver and a successful unicast receiver/sender, and obtain broadcast and unicast throughputs along discrete and continuous traffic streams. We further examine the impacts on communication throughputs of the transmission range and the interference range of dedicated short range communication devices as well as the market penetration rate of equipped vehicles and the percentage of senders. Finally, we investigate the influence of shock waves on communication throughputs.     

Development and calibration of a long-distance passenger traffic assignment model

This paper studies the assignment of long-distance passenger traffic on a highway corridor network. First, we propose a traditional model for the long-distance traffic assignment considering interactions with local commuter traffic. It addresses the effect of local networks on highway corridors. An iterative algorithm is developed to solve for the exact solution. Then, to address the potential computational issues that arise therein, a decomposition method is proposed by introducing a new concept of corridor elasticity. An assignment procedure for long-distance passenger traffic is developed accordingly. Numerical tests show that the proposed decomposition method makes significant improvements in computational performance at a small loss of optimality. This decomposition method well approximates the exact assignment from the traditional formulation, especially when the highway corridors are near-saturation. The proposed decomposition method appears practical for application.     

A valuation of the environmental performance of vehicles: an analysis and comparison of two methodologies

The European Clean Vehicle Directive was introduced in 2009 to create an obligation on public authorities to take into account the impact of energy consumption, carbon dioxide (CO₂) emissions and pollutant emissions into their purchasing decisions for road transport vehicles. This should stimulate the market for clean and energy-efficient vehicles and improve transport's impact on environment, climate change and energy use. Therefore the so-called ‘Operational Lifetime Cost’ of a vehicle is calculated, divided into the cost for energy consumption, CO₂ and pollutant (nitrous oxide, particulate matter, non-methane hydrocarbons) emissions. In Belgium, a different methodology has been developed to calculate the environmental impact of a vehicle, called ‘Ecoscore’, based on a well-to-wheel approach. More pollutants are included compared to the Clean Vehicle methodology, but also indirect emissions are taken into account. In this paper, both methodologies are compared and used to analyze the environmental performance of passenger cars with different fuel types and from different vehicle segments. Similar rankings between both methodologies are obtained; however, the large impact of energy use (and CO₂ emissions) in the Clean Vehicle methodology disadvantages compressed natural gas cars, as well as diesel cars equipped with particulate filters, compared to the Ecoscore methodology.     

威大线客滚船轮机设计简介

本文简要介绍了威(海)大(连)线客滚船轮机设计中的所遇到的一些问题和解决的办法。     

应用PDM技术实施舰船辅机承制项目管理

分析了舰船辅机承制的特点,描述了在承制项目管理中运用PDM技术的基本方法,提出了项目管理物料清单(PMBOM)概念,并从管理和技术角度论述了必要性和可行性.     

船体分段焊接变形仿真

船体分段在焊接过程中产生的焊接变形会使船体结构强度降低,然而精确预测和控制焊接变形是个难题.文章提供了准确预测焊接变形的固有应变等效载荷法.这种方法运用有限元法结合固有应变理论以及实验结果对焊接变形进行分析:引入简化的弹-塑性分析杆-弹簧模型,通过分析得到固有应变受焊接区域约束度及最高温度分布情况的影响;将固有应变转化为等效载荷,应用弹性有限元分析求得整个结构的焊接变形.计算结果与LEECH计算及实验结果吻合较好.     

潜艇耐压舱室过渡段结构型式的探讨

为了探讨潜艇不同直径的耐压舱室过渡段结构型式的最优设计,利用工程计算方法和有限元方法,分析过渡段结构的应力集中,提出了能够使不同直径圆柱壳光滑过渡的结构形式--双圆弧式过渡形式.计算结果表明:双圆弧式的过渡形式能使不同直径圆柱壳两端连接处消除应力集中和改善过渡段应力分布.     

裂纹尖端塑性区三维有限元分析

裂纹尖端塑性区的大小与其三维约束状态有关,而三维约束状态不仅与板厚还与外载荷、材料性质有关.因此不论是薄板还是厚板,用平面应力或者平面应变来模拟其状态都有局限性.现阶段对于三维约束状态下的裂纹还没有一个公认的可以准确计算塑性区大小的公式.文章用有限元对小范围屈服下,含Ⅰ型中心穿透裂纹板裂纹尖端的三维塑性区进行了研究,分析了硬化指数、屈服强度以及泊松比对塑性区大小的影响.计算从平面应力逐渐过渡到平面应变,结果与现有理论的预测结果进行比较,进而给出了一个计算裂纹尖端塑性区大小的计算公式.